TM 10-3835-223-13&P
5-5. POWER UNIT FILTER REPAIR -cont.
c.
Inspection.
(1)
Inspect hydraulic reservoir (6) for cracks, missing cooling fins, broken welds, and
corrosion.
(2)
Inspect o-ring (3) for cuts, tears, and deterioration.
d.
e.
(3)
Inspect suction pipe (2) for clogs.
Repair. Replace o-ring and filter.
Assembly.
(1)
Install replacement filter (7) on suction pipe (2).
(2)
Position o-ring (3) and hydraulic reservoir (6) on pump/motor assembly (1).
(3)
(3)
Install four screws (5).
Service reservoir (6) with hydraulic fluid.
(4)
Install vent cap (4) on hydraulic reservoir (6).
5-13