TM 10-3835-223-13 & P
4-15. HOSE/QUICK DISCONNECT ASSEMBLY (HYDRAULIC) REPLACEMENT- cont.
b.
Installation.
(1)
If removed, install quick disconnects as follows:
(a)
Install replacement bulkhead adapters (4 and 7 ) and nuts (2 and 8) on bracket (3).
(b)
Screw replacement couplers (6) and nipples (5) onto bulkhead adapters (4).
(c)
Connect hose fitting (1 and 9) to bulkhead adapters (4 and 7).
(2)
Position replacement hose assembly (11) on power pack.
CAUTION
Do not cross connect hydraulic hoses. Erratic or reversed operation will result
Make sure o-rings (12) are installed on hose swivel fittings before making
connections.
(3)
Connect swivel fittings (10) to power pack components as marked. Tighten fittings.
(4)
Remove tags.
(5)
4-23