TM 10-4130-237-14
5-5.
CYLINDER HEADS REPLACEMENT (CONT)
3
Remove nine cylinder head bolts, Remove cylinder head.
4
Remove all head gasket material from cylinder head and engine.
5
Remove all carbon or foreign material from cylinder head and engine, being careful not to scratch sur-
face.
d. Installation of Left Cylinder Head
1
Place new cylinder head gasket on cylinder head assembly.
2
3
Place new cylinder head assembly on engine.
Apply sealing compound (MIL-S-22473) to bolt threads. Install nine cylinder head bolts and hand
tighten.
4
Torque cylinder head bolts to 160 in. lb (18.1 Nm) following torque pattern above.
5
Install air guide cover and cylinder shield. Install four air guide cover mounting bolts and cylinder
shield mounting bolt.
6
Install spark plug (para 4-24).
5-6.
CYLINDER BLOCK ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
5-23