TM 10-4130-237-14
5-26. BALL VALVE ASSEMBLY REPLACEMENT (CONT)
4
Drive out handle. Remove oil drain hose clamp. Remove oil drain hose.
5 Remove valve handle mounting nut and tube.
Polyurethane foam is flammable. Burning foam causes toxic fumes. When
soldering, be very careful not to ignite foam.
NOTE
Desolder fittings as needed to remove from valve assembly.
6
Remove ball valve assembly.
7 Remove fitting from right side of valve assembly.
8
Remove fitting from left side of valve assembly.
9
Remove fitting from top side of valve assembly.
b. Installation
1
Install fittings in valve assembly.
5-82