TM 10-4130-237-14
6-2.
CYLINDER BLOCK ASSEMBLY REPAIR/OVERHAUL (CONT)
32 Remove piston rings one at a time. Set piston aside. Discard piston rings.
33 Repeat steps 29 through 32 for left connecting rod and piston assembly.
1
Visually inspect cylinders for cracked or scored walls.
NOTE
If cylinder bore is more than 0.003 in. (0.076 mm) oversize or more than
0.0025 in. (0.064 mm) out of round, cylinder block must be replaced.
2
Measure size of cylinder bore.
6 - 9