TM 10-4320-345-13
4-16.
DISTRIBUTION NOZZLE (1 1/2-INCH) REPAIR - cont.
NOTE
Ensure that anti-seize tape is applied in the same direction as the threads
(9)
Apply anti-seize tape to threads of cap (10).
(10)
Install gasket (11) on cap (10).
(11)
Position spring (12) on top of disc holder (13).
(12)
Install cap (10) over spring (12) and onto body (26).
(13)
Position handle (9) on body (26) and install groove pin (8).
(14)
Apply anti-seize tape to male threads of swivel (7) and female coupling (6).
(15)
Screw female coupling (6) into swivel (7).
(16)
Screw swivel (7) and attached female coupling (6) onto body (26).
(17)
Install gasket (5) in female coupling (6).
(18)
Connect tube cap (4) to chain and spring (2) with S-hook (3).
(19)
Connect chain and spring (2) to body (26) with S-hook (1).
(20)
Install distribution nozzle in water system (para 3-4b).
(21)
Startup water system (para 2-13c) and check distribution nozzle for leaks.
4-32