TM 10-4320-345-13
2-16. PREPARATION FOR MOVEMNT-cont.
d.
Disassemble Hose Suspension Kits.
NOTE
Disassembly of one hose suspension kit is shown Disassembly of remaining kits is similar.
Lowering Hoseline Refer to figure 2-33.
(1) Disconnect suspended hose (2) from upline and downline hose segments by removing coupling
clamps (para 2-1 le) Allow suspended hose to drain.
(2) Remove three clamps (7) securing shackles (4) to end of wire rope (3). Repeat for other end of
suspended hose (2).
(3) Pull suspended hose (2) along wire rope (3) to upline tripod (9) until shackle (4) contacts tackle
block (8).
(4) While supporting saddle (5) and hose(2), remove bolt (6) from shackle (4).
(5) Lower hose (2) and remove saddle (5) from hose.
(6) Remove shackle (4) from wire rope (3).
(7) Repeat steps (3) through (6) until suspended hose is pulled from wire rope (3) and all saddles (5) are
removed.
(8) Untie manila rope (1) from leading end of hose (2).
2-76