TM 10-4320-345-13
2-16. PREPARATION FOR MOVEMENT-cont.
Disassemble Wire Rope and Turnbuckles Refer to figure 2-34.
(9) Loosen turnbuckles (9) at both ends of wire rope (7).
(10)
Disconnect wire rope (7) from turnbuckles (9).
(10)
Disconnect turnbuckles (9) from stakes (10).
(11)
If wire rope (7) can be reused, remove loop from both ends of rope as follows.
(a) Remove two nuts (4), clamp (5) and U-bolt (6) from wire rope (7).
(b) Remove two nuts (1), clamp (2), U-bolt (3) and thimble (8) from wire rope (7).
(12)
Pull wire rope (7) across obstruction. Coil wire rope for storage.
(13)
Remove tackle block (8, figure 2-30) from each tripod (9).
2-78