Hose Connection Kit Assembly.
To prevent contamination of drinking water, make sure protective
caps and plugs are installed in component when not in use.
Install all gate valves with hand wheel in upright position and valve fully
Eight hose connection kits are used in the 40K Water Distribution Sys-
tem. After each kit is assembled, they are all connected to form one dis-
Connect tee (34) from 350 GPM connection kit to discharge hose (20 ft) (47). (See connection
Connect discharge hose (20 ft) (48) to discharge hose (47).
Connect tee (46) to discharge hose (48).
Connect reducer (49) to tee (46).
Connect gate valve (50) to reducer (49).
Connect discharge hose (20 ft) (51) to gate valve (50).
Repeat steps (2) through (6) to assemble seven remaining connection kits.
Connect seven remaining kits.
Unfold nozzle stand assembly (52) and attach discharge hose (51) to bracket on stand.