TM 10-4610-242-13
4-32. WATER METER ASSEMBLY REPAIR - cont.
(10)
Position gasket (7) and male coupling (6) on meter (15).
(11)
Install eight screws (5) and self locking nuts (4).
NOTE
Ensure packing is fully seated in groove of cap.
(12)
Install gasket (2) in cap (3).
(13)
Connect cap (3) to male coupling (9) with ring (1).
(14)
Install water meter assembly in water system (para 3-4a).
(15)
Startup water system (para 2-12c) and check water meter assembly for leaks.
4-33. 125 GPM PUMP CONNECTION KIT MAINTENANCE.
The 125 gpm pump connection kit consists of the components listed below. Refer to the following paragraphs for
applicable maintenance procedures
Procedure
Para.
Discharge Hose Repair .................................................................................................... 4-14
Gate Valve Assembly (2-inch) Repair............................................................................... 4-15
Check Valve Assembly (2-inch) Repair ............................................................................ 4-34
4-92