4-43. WATER TANK CHEST REPAIR - cont.
End Panel Repair. Refer to figure 4-44.
Peel damaged gasket material (1) from both sides of end panel (5).
Clean end panel (5) gasket mounting surface with detergent and clean water.
Wipe dry with wiping rag.
Gasket material is supplied in rolls. Cut gasket to length as required.
Peel backing from gasket material (1) and press in place on end panel (5).
Remove pin (2) from handle (4).
Remove handle (4) and flat washer (3) from end panel (5).
Position washer (3) and handle (4) in end panel (5).
Insert pin (2) into opening in handle (4).
Replace end panel if cracked or badly damaged.