TM 10-4930-220-13&P
(1)
(2)
(3)
(4)
Place stowage boxes (3) on the two existing 4-hole patterns in the flatbed trailer (1 ) (forward curb-
side and roadside areas). See Figure 4-7.
Attach boxes to flatbed using four bolts (4), four washers (5), and four nuts (6).
Figure 48. Tank Mounting Angle Installation.
Orient and position tank mounting angles, (7) and (11 ), on flatbed at approximately 44.50 inches
from front edge and 19.66 inches from side edge. See Figure 4-8.
Loosely attach angles to flatbed using eight bolts, (8), sixteen washers, (9), and eight nuts (10).
Move angles outboard (on flatbed) as far as slots (in angles) will permit.
Figure 49. Preparation for Installation.
417