Serious injury could occur if heavy equipment is moved/lifted without sufficient person-
nel to do the job. Wear safety shoes, gloves, and other suitable protective clothing. Do
not try to lift more than 50 pounds by yourself.
Serious injury could occur if the WTSC falls from a forklift. Do not attempt to lift a
WTSC with a forklift if the chest is loaded with only one 20,000 gallon storage tank.
Use a forklift truck or other suitable material handling equipment to remove package from carrier.
Remove shipping straps and other packaging material used to secure the WTSC components during
Remove the technical publications envelope that is attached to the inside of the crate and put them in a
Carefully remove all WTSC components from package.
c. Checking Unpacked Equipment. Check the unpacked WTSC as follows:
Inspect each of the WTSC components for damage that may have been occurred during shipment, espe-
cially if shipping package is damaged. If any component has been damaged, report damage on SF 364, Report of Dis-
Check the quantities and type of each component against the packing slip to see if the shipment is com-
plete. Report all discrepancies in accordance with the instructions as defined within DA PAM 738-750. See that all
Components of End Item and Basic Issue Items (See Appendix D) are with the tank storage chest.
(3) Check to see whether the equipment has been modified.
4-6. PRELIMINARY SERVICING AND ADJUSTMENT OF EQUIPMENT. The WTSC requires no preliminary servicing
or adjustment before use.
Section III. UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES
4-7. UNIT PMCS. The WTSC has no authorized unit maintenance PMCS
Section IV. UNIT TROUBLESHOOTING PROCEDURES
4-8. INTRODUCTION. There are no unit maintenance troubleshooting procedures for the WTSC.
Section V. UNIT MAINTENANCE PROCEDURES
4-9. GENERAL INFORMATION. This section contains the maintenance procedures authorized for the unit maintenance
of the WTSC as defined in the Maintenance Allocation Chart located in Appendix B.
4-2 / (4-3 Blank)