TM 5-3820-256-10
(3)
Remove the remote control pendant (1, Figure 2-29) from the storage box (2) near the crane base.
(4)
Release the crane from its traveling position by moving the winch switch to the DOWN position. Unwind
enough wire line to relieve tension from the wire line.
WARNING
When handling the winch wire line, use leather gloves. Wire rope can seriously injure bare flesh.
(5)
Unhook the snatch block (3) from the boom-stand hook. Make sure there is nothing in the way of the snatch
block or wire line.
Figure 2-29. Crane Operating Instructions
2-57