Figure 4-30. Motor Manifold Valve Assembly
4-10.3 Rotary Table Transmission (Figure 4-30A).
The purposes of correct orientation, the illustration in Figure 4-30A views the transmission
from the rear.
Disconnect the shift linkage from the side of the transmission. Remove the drive shaft that connects between
the transmission and the rotary table. Remove the hydraulic motor from the transmission.
Remove the drain plug (60) and drain the oil from the transmission. Remove the capscrews (20 and 22) and
washers (21) to remove the transmission from its mounting. Retain the shims (24); discard the gasket (23).
Remove the safety wire (28) and unscrew two drilled-head capscrews (29). Remove shims (31) and companion
flange (32). Unscrew four nuts (34) and washers (35) and two capscrews (36) and sealing washers (37) and
remove the output bearing retainer (38) and gasket (39). Remove and discard the oil seal (40).