TM 5-3825-226-24
AIR COMPRESSOR
DISASSEMBLE AIR
COMPRESSOR
Tools Needed
A
B
1P2321
Puller Assembly
1
8H663
Bearing Puller Attachment
1
1P457
Plate
1
start by:
a)
remove air compressor
1 . Remove two bolts (2) and remove air compressor
governor (1), the spacer and two gaskets from the air
compressor.
NOTE
To disassemble governor (1) see
REMOVE
AIR
COMPRESSOR
GOVERNOR.
2. Remove the cotter pin and nut (3) from the air
compressor.
3. Remove pulley (4) from the air compressor with tool
(A).
NOTE
Before
the
compressor
is
disassembled
put
identification
marks on the crankcase, cylinder
block, end covers, crankshaft, and
cylinder head for correct installation
and alignment at assembly.
4. Remove cap nuts (5), the springs and discharge
valves.
5. Remove bolts (6) and cylinder head (7).
6. Remove gasket (8) and inlet valve springs (9)
from the cylinder head.
3-15