WATER TEMPERATURE REGULATORS,
BELT TIGHTENER (WATER PUMP)
Put housing (2) and the gasket in position and
install the bolts, washers and nuts to hold it.
Install hose (3) and tighten the clamps.
Fill the cooling system with coolant to the correct
REMOVE AND INSTALL BELT TIGHTENER (WATER
Loosen two bolts (1) to release the tension on vee
belts (3). Remove the vee belts from the idler
Remove bolts (1), the washers and belt tightener
Put belt tightener (2) in position on the timing
gear cover and install the washers and bolts (1) to
Put vee belts (3) in position on the idler pulley.
Make an adjustment of the belt tension. To get
the correct belt tension use a tension gauge such
as Burroughs Tool Company. Part No. BT-3396-
4-16 or an equivalent. The correct gauge
indication is 120 ± 5.