TM 5-3825-226-24
6.
Disconnect stator wiring by removing three
screws (15). Remove frame assembly (4) from
armature housing (3).
7.
Remove inspection plug (16) and preformed
packing (17) from lever housing (2).
8.
Remove nut (18) from shaft of plunger
assembly (19).
9.
Remove seven capscrews (20) and separate
lever housing (2) from armature housing (3).
10.
Remove armature (21) from armature housing
(3).
11.
Remove seal (22), seal (23), and bearing (24)
from lever housing (2).
3-41