FUEL INJECTION LINES AND AIR INLET MANIFOLD
REMOVE FUEL INJECTION LINES AND AIR INLET
Loosen clamps (2), (3) and (4) to remove tube
assembly (1) and the hoses from the engine.
Loosen the clamps and remove hose (5) from
the crankcase ventilator valve and air inlet
Thoroughly clean the area around each fuel line
connection before any fuel lines are removed.
Put identification of the fuel injection lines as to
their location on the fuel injection pumps and
Disconnect fuel injection lines (7) from the
adapters and the fuel injection pump housing.
Remove bolt (6) and remove fuel injection lines
Put protection caps (5F2807) and
plugs (2F2990) on the lines and
pumps to keep dirt and foreign
material out of the fuel system.
Disconnect fuel injection lines (8) from the fuel
injection pump housing, adapters and the fuel
filter and remove them from the engine.