TM 5-3825-226-24
LOWER FUEL TANK
6.
Put OTC Model 1790 Lo-Lift Transmission Jack
(A) in position on the front side of cross frame.
Slide tank forward over cross frame and on the
jack. Lower the jack and remove from the rear
as shown. The weight of the tank is 130 lb. (59
kg).
INSTALL LOWER FUEL TANK
1.
Put the fuel tank on transmission jack (A) and
put tank in position under water distributor. Lift
the jack and slide the tank in position.
2.
Put the plates in position and install bolts and
nuts (1).
3.
Connect brake lines and install bolts on each
side of the frame. Install bolt (3) and connect
brake line (2) to the junction.
4.
Connect fuel line (4) to the fitting on top of tank.
3-88
VIEW FROM UNDER MACHINE
VIEW FROM UNDER MACHINE