ELECTRIC FUEL PUMP
REMOVE AND INSTALL ELECTRIC FUEL
Remove the back-up alarm and cover from the
water distributor as an assembly. The weight of
this assembly is 135 lb. (61kg).
Disconnect the brown electrical lead (2) and
the black electrical lead (3) at the fuel pump (4)
NOTE: Use a small container to catch any fuel
remaining in the fuel lines as the fuel pump is removed.
Disconnect the fuel pump inlet (5) and outlet (6)
fuel lines. Plug the fuel inlet line (5) with a plug.
Remove nut (7), washer (8), and bolt (9) from
clamp (10). Push fuel pump (4) out of clamp
(10). If the fuel pump cannot be easily removed
from the clamp, remove bolt (11), washer (12),
and clamp (10) with the fuel pump assembly.
If removed, install clamp (10) with bolt (11) and
Position fuel pump (4) in clamp (10) and secure
with bolt (9), washer (8) and nut (7).
Connect fuel pump outlet (6) and inlet (5) fuel
lines to the fuel pump.
Connect electrical leads (3) and (2) at the fuel
pump (4) connectors.
After installing pump, check for leakage of fuel
at the pump fittings.
Install back-up alarm and cover as an assembly.