TM 5-3825-226-24
TORQUE CONVERTER
9.
Disconnect hose assemblies (13) and (14) and
remove the temperature sending unit (15) from
the torque converter.
10.
Install a 5/8"-11 NC forged eyebolt in the top of
the torque converter and fasten a hoist.
11.
Remove bolts (16) and lower the torque
converter to the floor. Weight of the torque
converter is 250 lb. (113 kg).
INSTALL TORQUE CONVERTER
1.
Put the torque converter in position under the
machine.
2.
Install a 5/8"11 NC forged eyebolt in the top of
the torque converter and fasten a hoist.
3.
Install the gasket and lift the torque converter
into position on the machine.
4.
Install the bolts that hold the torque converter to
the flywheel housing.
5.
Install the bolts that hold upper drive shaft (1) to
the torque converter and tighten to a torque of
45 ± 5 lb.ft. (60 ± 7 N.m).
3-158