TM 5-3825-226-24
TRANSMISSION OIL PUMP
ASSEMBLE TRANSMISSION OIL PUMP
Tools Needed
A
1P531
Handle
1
1P461
Drive Plate
1
1P472
Drive Plate
1
1.
Make a replacement of pins (2) in plate (5) if
necessary.
2.
Install O-ring seals (I) on each side of case (3).
3.
Put case (3) and gears (4) in position on plate
(5).
4.
Make a replacement of pins (6) in spacer
assembly (7) if necessary.
5.
Install ring (12), pin (8), gear ( 11) and ring (9)
on shaft (10).
6.
Install shaft (10) in spacer assembly (7) and
install the ball that holds the shaft in position.
7.
Install spacer assembly (7) on case (3) and turn
shaft (10) until the ball fits into the groove (slot)
in gear (4).
8.
Install the pin in shaft (13) that holds gear (15).
9.
Install gear (15) on shaft (13) and install the two
rings (14) on each side of the gear.
10.
Install shaft (13) in spacer assembly (7).
3-181