TM 5-3825-226-24
TRANSMISSION OIL FILTER AND BYPASS VALVE
REMOVE TRANSMISSION OIL FILTER AND BYPASS
VALVE
1.
Remove plug (1), the spring and bypass valve
spool.
2.
Remove bolts (2).
3.
Remove cover assembly (3) and element
assembly (4) from the filter housing.
4.
Remove nut (5), the retainer and element
assembly (4) from cover assembly (3). Remove
the O-ring seals from the cover assembly and
element assembly.
INSTALL TRANSMISSION OIL FILTER AND BYPASS
VALVE
1.
Put the O-ring seal in position on cover
assembly (1).
2.
Make sure stud (5) is tightened to a torque of 40
± 5 lb. ft. (55 ± 7 Nm).
3.
Install the O-ring seal on retainer (3).
4.
Install element assembly (2), retainer (3) and
nut (4) on the cover assembly. Tighten the nut
to a torque of 10 ± 2 lb. ft. (14 ±3 Nm).
5.
Install
the
cover
assembly
and
element
assembly in the housing and tighten bolts (9).
6.
Install valve spool (8), spring (7), the O-ring seal
and plug (6). Tighten the plug to a torque of 35
± 5 lb. ft. (45 ± 7 Nm).
3-183