TM 5-3825-226-24
TRANSMISSION
15.
Install springs (30).
16.
If necessary, make a replacement of dowels
(31) on each side of No. 5 clutch housing (32)
so they extend the same height as the original
dowels.
17.
Use tool (A) to hold the piston in No. 5 clutch
housing (32) and install the clutch housing.
Remove tooling (A).
18.
Install No. 4 clutch ring gear (34) and ring (33)
to hold the gear in position.
19.
Install the three disc assemblies (35) and two
plates (36) for the No. 4 clutch. Start with a
disc assembly.
20.
Install springs (37).
3-206