TM 5-3825-226-24
35.
Install pins (65), the four disc assemblies (64)
and three plates (66). Start with a disc
assembly.
36.
Put ring (60) under compression to install gear
(67).
37.
Use a hammer and punch and install pins (68)
to hold the ends of the ring apart inside gear
(67).
38.
Install springs (71).
39.
If necessary, make a replacement of dowels
(70) in No. 2 clutch housing (69) so they extend
to the same height as the original dowels.
40.
Install No. 2 clutch housing (69) and piston.
Make sure springs (71) engage in the holes in
the No. 2 clutch housing.
41.
Install ring gear (74), the five disc assemblies
(72) and four plates (73). Start with a disc
assembly.
3-209