TM 5-3825-226-24
OUTPUT TRANSFER GEARS
17.
Remove the bearing cup-from cage (15) wit
tooling (A). Remove O-ring sea- (17) from the
cage.
18.
Remove the bolts from cage (18). Use two 3/8"-
16 NC forcing screws and remove the cage
from case (14).
19.
Remove the bearing cup from cage (18) with
tooling (A). Remove O-ring seal (19) from the
cage.
20.
Remove gear (20) and the shaft assembly from
the case.
21.
Use tooling (3) and remove the bearing cone
from shaft assembly (21).
22.
Remove gear (20) and the bearing cone from
start assembly (21) with tool (C).
3-221