TM 5-3825-226-24
DIFFERENTIAL AND CARRIER ASSEMBLY
5.
Remove the guide bolts and install the original
bolts (1).
6.
Install the eight nuts (2) and tighten.
7.
Install the bolts that hold tee assembly (4) to the
frame.
8.
Install the bolt in the clip that holds the right
wheel brake line (3) to the frame.
9.
Install muffler (5) and tube (6).
10.
Install axles (8).
11.
Make sure the flat surfaces on shafts (7) are in
the position shown.
12.
Make a replacement of the O-ring seal in the
final drive covers if necessary. Install the final
drive covers.
13.
Fill the differential and final drive compartments
with oil to the correct level. end by:
a)
install lower drive shaft
b)
install crankcase guard
3-230