TM 5-3825-226-24
DIFFERENTIAL AND CARRIER ASSEMBLY (LOCK TYPE)
34.
Assemble the lock group as follows:
a)
Put the three seals in position on piston
(35).
b)
Put clean grease on the seals and install
piston (35) in cylinder (36).
c)
Install springs (38) in the piston.
d)
Put housing assembly (37) in position on
the cylinder.
e)
Install the locks and bolts (41). Tighten
the bolts evenly and bend the locks on the
bolts.
f)
Put washer (40) and jaw (39) in position in
the cylinder.
g)
Install washer (42) and spacer (43) in
cylinder (36).
3-244