TM 5-3825-226-24
AIR DRYER
DISASSEMBLE AND ASSEMBLE
AIR DRYER
1.
Put the machine on level ground. Lower all
equipment to the ground, put blocks in front and
in back of the wheels so the machine cannot
move. Shut off the engine.
2.
Remove all of the air pressure from the air
reservoirs and air system. Make sure the lines
to and from the air dryer are at atmospheric
pressure.
3.
Disconnect the unloader line from the end cover
of the air dryer. Disconnect the wire at the air
dryer.
NOTE:
To better show the disassembly and
assembly of the air dryer, it has been
removed from the machine.
4.
Loosen the bolts (1) and turn the clamps (2) 90°
as shown.
5.
Push in on end cover assembly (5).
6.
Put a screw driver in notch (3) and remove snap
ring (4).
7.
Remove end cover assembly (5).
3-250