TM 5-3825-226-24
HYDRAULIC TANK
12.
Disconnect hose assemblies (18) from the tank.
13.
Remove
the
two
bolts
and
washers
to
disconnect tube assembly (17) from the rear of
the tank.
14.
Disconnect hose assembly (16) from angle
assembly (19) under the hitch and pull the hose
assembly to the tank.
15.
Remove one bolt (20) from each side of the
tank that holds the filter group to the tank.
Install two 7/16"-14 NC forged eyebolts in the
top of the tank.
16.
Fasten a hoist and remove the tank. Weight of
the tank is 210 lb. (94.5 kg).
NOTE:
The tank must be lifted at a small
angle so the flange on tube assembly
(17) will not hold the tank.
INSTALL HYDRAULIC TANK
1.
Install two 7/16"-14 NC forged eyebolts in the
top of tank (1). Fasten a hoist and put tank (1)
in position on the machine.
3-261