HYDRAULIC TANK, HYDRAULIC TANK OIL FILTERS
Make sure the O-ring seals are in position on
tube assemblies (17) and (18). Connect the
tube assemblies to the bottom of the tank.
Put panel assembly (19) in position and install
the four bolts (20), washers and nuts to hold it in
Fill the hydraulic system with oil to the correct
level. See TM 5-3825-226-10.
REMOVE HYDRAULIC TANK OIL
FILTERS AND HOUSING
hydraulic system before any work is
Hold the cover of valve group (1) to prevent
seal damage. Turn bolt (2) to remove valve
group (1) and the filters as a unit.
Lift the hood and remove panel (3) from the
hydraulic tank and the cab.