TM 5-3825-226-24
BRAKE CONTROL VALVE
2.
Install three screw (7) to hold the valve from the
inside of the cab.
3.
Install rubber cover (9) over the valve.
4.
Install brake pedal (8), pin (10) and the cotter
pin to the bracket.
DISASSEMBLE BRAKE CONTROL VAVLE
Tools Needed
A
B
1P1857
Snap Ring Pliers
1
1P1853
Snap Ring Pliers
1
start by:
a)
remove brake control valve
NOTE:
Put identification marks on the valve
or correct
assembly.
1.
Remove four bolts (2) from the bottom cover.
Remove bottom cover (1) from the valve.
Remove the O-ring seal from the bottom cover
(1). Check the condition of the seal. If the seal
has damage, use new parts for replacement.
2.
Remove snap ring (3) with tool (A). Remove
clip (4) from bottom cover (1).
3-277