TM 5-3825-226-24
STEERING CYLINDERS
DISASSEMBLE STEERING
CYLINDERS
Tools Needed
A
B
C
1P510
Driver Group
1
1 P1784
Hydraulic Cylinder
Repair Stand
1
5P3100
Pump Group
1
1 P850
Torque Multiplier
1
1 P851
Adapter
1
1 P852
Adapter
1
5S6077
Socket
1
start by:
a) remove steering cylinders
1.
Remove
the
bearings
from
the
cylinder
assembly and rod assembly with tool group (A)
and a press.
2.
Put the cylinder in position on tooling (B).
3.
Slowly extend the cylinder to drain the oil out of
the cylinder. Install support (1) under the rod
and fasten a strap around the rod to hold it in
position.
4.
Remove four bolts (2).
5.
Pull the cylinder away from rod (3) and the
head.
6.
Remove the nut that holds piston (4) to rod (3)
with tooling (C).
7.
Remove piston (4) from the rod.
3-302