Remove seal assemblies (6) and ring (5) from
Move the cylinder on to the rod and head.
Install four 5/8"-11 NC x 4 in. (101.6 mm) long
bolts (7) to hold head (8) to the cylinder. Move
the cylinder and head off the rod.
Remove bolts (7) and head (8) from the
Remove the O-ring seal, back-up ring and three
seals (9) from head (8).
ASSEMBLE STEERING CYLINDERS
Use tool (A) to install seal (4) in head (1).
Install seal (3) in the head with the lip of the seal
toward seal (4).
Use tool group (B) to install seal (2) in the head
with the lip of the seal toward the outside.
Install O-ring seal (6) and back-up ring (5) in the
head as shown.
Put the cylinder assembly and rod on tooling
Use four 5/8"-11 NC x 4 in. (101.6 mm) long
bolts and spacers to hold head (1) in position on
the cylinder assembly as shown.
Install tool (C) on the rod. Put clean hydraulic
oil on the lips of the seals in the head. Push the
cylinders assembly and head on the rod.
Remove the bolts that hold the head and
cylinder assembly together and remove tool (C)
from the rod.