STEERING CONTROL VALVE
Remove spool (10) from the body. Remove
seat (9), springs and flow control valve from
body. Remove O-ring seal from seat (9).
Remove the bolt from stem (10). Use caution
and loosen bolt slowly because of springs.
Remove the retainers, the spring, the washers
and the shims from the end of the stem.
installation purpose .
Remove plug (11) and O-ring seal from body
Remove top seat (12) from the body with tooling
(A). Remove the check ball with a magnet.
Remove the bottom seat with tool (B).
Do not remove the bottom seat if not