Use the jack and lower the cab. Fasten a hoist
to the lift eye on top of the cab.
Remove clip and pin (38) from jack (25).
Remove two bolts (39) (front and rear) from the
left side of the cab. Lift the cab straight up off
the frame. The weight of the cab is 3,500 lb.
NOTE: Procedure shown uses enclosed cab. Same
procedure can be used for open type canopy (ROPS).
Fasten a hoist to the lifting eye on top of cab (1)
and put the cab in position on the frame.
Install two bolts (2) (front and rear) on the left
side of the cab.