TM 5-3825-226-24
CAB
8.
Connect tachometer cable (10) to the engine.
Connect water temperature sensing unit (9) to the
engine.
9.
Connect wire (11) to the solenoid. Install angle
bracket (12) tot he timing cover housing and make
reference to TM 5-3825-226-10 for the correct
adjustment to the belt.
10. Lower the cab and install two bolts (13) and nuts to
the cab. Install bracket (14) to the rear bolt for the
jack. Remove the jack from the frame and install it
on bracket (14) as shown.
NOTE
Make sure the jack is put on the
bracket
before
the
machine
is
moved. The hitch will hit the jack if
not removed from the frame.
11. Install panel assembly (16). Put cables (15) in
position through the holes in the cab.
12. Install the four bolts that connect the fender and the
cab.
3 -329