TM 5-3825-226-24
CAB
13. Put cables (18) in position through cab and install
the rubber protectors, the extensions and nuts (17).
Install lower cable on the lever. Install the pin
through the lever. Install the top cable as shown.
To adjust linkage, see LINKAGE ADJUSTMENTS
FOR THE TRANSMISSION HYDRAULIC
CONTROLS in POWER SHIFT TRANSMISSION,
TESTING AND ADJUSTING.
14. Install seat (19) in the cab and connect seat belt
(20) to the eyebolts.
15. Install four nuts (21), rubber protectors, extension
(23) and four nuts (22) to the cables.
16. Install links (25) and angle (24). Install the nuts on
the ends of the cables.
NOTE
Use nuts (22) to adjust the levers in
their correct vertical position.
17. Install cover assembly (27) and knobs (26).
3-330