TM 5-3825-226-24
DASH CONTROLS AND SWITCHES,
PARKING/EMERGENCY BRAKE CONTROL VALVE
2. Install cover (1) and lower the cab. See INSTALL
CAB for details.
3. Install the nut to disconnect switch (2). Install the
nut, the knob and the screw to start switch (3) and light
switch (4).
4. Install the nut, the knob and the pin to emergency
brake (6) and parking brake (5) control valves.
DISASSEMBLE
PARKING/EMERGENCY
BRAKE
CONTROL VALVE
start by:
*a)
Remove
parking/emergency
brake
control
valve.
*NOTE This operation is in REMOVE
DASH CONTROLS AND SWITCHES.
1. Remove screws (2) from valve body (1). Remove
cover (3).
2. Remove nut (5) and the washer from the shaft.
3. Remove rubber spacer (4) and ring (6) from the
valve body.
3-338