TM 5-3825-226-24
WHEEL ASSEMBLIES, BEARINGS AND SEALS
REMOVE WHEEL ASSEMBLIES
BEARING AND SEALS
Tools Needed
A
B
C
5P6153
Spanner Wrench
1
887548
Puller Assembly
1
1
887554
Bearing Cup Puller
Attachment
1
8H684
Ratchet Box Wrench
1
1
887551
Bearing Puller Attachment
1
887549
Leg
2
start by:
a) remove water distributor rim and tire
b) remove brake head assemblies
1.
Remove cover (1) from the wheel assembly.
2.
Bend the tab of the lock from the nut and use
tool (A) to remove the two nuts and lock that
hold the wheel assembly to the axle.
3.
Remove the six bolts (2) and lockwashers that
hold the plate to the hub assembly.
4.
Fasten a hoist to the wheel assembly.
5.
Use two 5/8"-11 NC forcing screws or bolts
approximately 4 in. (101.6 mm) long and two
spacers to push the wheel assembly from the
axle. Remove the wheel assembly. The weight
of the wheel assembly is 225 lb. (101 kg).
6-41