TM 5-3825-226-24
Steering Knuckles, Kingpins
And Bearings
2. Put steering knuckle (1) in position on the axle beam
assembly.
3. Put GAA Multipurpose Grease on the kingpin. Install
kingpin (2) through the knuckle and axle beam
assembly. Install and tighten bolt (3) to hold the kingpin
in position.
4. Install upper spacer (4) on the kingpin.
5. Install upper bearing (5) against the spacer.
6. Install upper cover assembly (8) and tighten four
bolts (6) and (7) to a torque of 135 ± 14 Nm (100 ± 10
Ib. ft.). Tighten two bolts (9) to a torque of 270 ± 20
Nm (200 ± 15 Ib. ft.).
7. Install lower spacer (10) on the kingpin.
7-15