TM 5-3825-229-14&P
4-14. CONTROL PANEL CABLES (cont)
a. Testing.
(1)
Prepare multimeter for ohms (continuity)
measurement per instructions supped
with multimeter.
(2)
Place remote (cab) control box (1) next
to rear control box (2).
(3)
Unscrew two screws (3) on each panel
(4) and open each panel.
(4)
Test for continuity of each wire in cable
that connects both control boxes together
as follows:
(a)
Place one test probe on any cable
wire connected to a terminal in
remote control box. Note color of
wire.
(b)
Place remaining test probe on cable
wire of same color in rear control
box.
4-31
Testing Control Panel Cables