TM 5-3895-370-14&P
5-46. SHOCK ABSORBER REPLACEMENT (CONT).
(4)
Remove cotter pin (7) and anchor pin (8) from
shock (4) and tie plate (9).
(5)
Remove cotter pin (10) from anchor pin (8).
Discard cotter pins.
(6)
If damaged, remove roll pin (11) from tie plate
(9).
b. Installation.
NOTE
Be sure to place closed end of cotter
pin over roll pin on tie plate below
and main frame above shock.
(1)
If removed, install roll pin (11) in tie plate (9).
(2)
Install cotter pin (10) in anchor pin (8).
(3)
Install shock (4) on tie plate (9) with anchor pin
(8) and cotter pin (7).
(4)
If removed, install roll pin (6) in main frame (3).
(5)
Install cotter pin (5) in anchor pin (2).
(6)
Install shock (4) on main frame (3) with anchor
pin (2) and cotter pin (1).
END OF TASK
5-158