TM 5-3895-370-14&P
NOTE
This task shows the assembly of one
valve body. The procedure is the
same for the remaining three valve
bodies.
(2)
Assemble valve body (7) as follows:
(a)
Install poppet (37), spring (36), preformed
packing (35), and cap (34) on valve body
(7).
(b)
Install spring (33), two spring caps (32),
and screw (31) on spool (26).
(c)
Install spacer (30) and preformed packing
(29) on valve body (7).
(d)
Install
preformed
packing
(28),
spool
positioner assembly (27) and spool (26) in
valve body (7).
(e)
Install compression plug (25) on positioner
cap (24).
(f)
Install positioner cap (24) in valve body
(7).
(g)
Install retainer (23).
(h)
Install two dowel spacers (22) in lever
bracket (20).
(i)
Install
preformed
packing
(21),
lever
bracket (20), and two screws (19) on valve
body (7).
5-177