TM 5-3895-370-14&P
(17)
Install two nuts (13) loosely.
(18)
Apply lubricating oil on shaft (12).
WARNING
Rotor and shaft assembly weighs 104
lbs (47 kg). Two personnel are
required to install assembly. Failure
to do so may result in injury to
personnel.
NOTE
Repack
preformed
packing
and
retaining washer in bracket after
installing rotor and shaft assembly.
(19)
Install rotor (15) and shaft (12) in casing (3).
Tighten two nuts (13).
NOTE
Insert brass bar through port opening
on casing between rotor teeth to
keep rotor and shaft assembly from
turning.
(20)
Install lockwasher (10) and nut (11) on rotor
shaft (12). Tighten nut 100 lb-ft (136 Nm) and
bend tang of lockwasher on nut.
5-197