ORGANIZATIONAL MAINTENANCE PROCEDURES
4-10. 2-INCH VALVE ASSY, REPLACEMENT
Mount valve body (2) in vice with protective pads.
Using pipe wrench remove female (1) and Male (3) couplings.
Remove nut (5) from shaft (6) and disengage control handle (4).
INSPECT AND CLEANING
a. Remove all tape residue from valve body and couplings.
b. Wash all parts in mild soap and water solution and dry with clean lint free cloth.
c. Inspect for damaged body (2), and control handle (4).
d. Replace valve body (2) or handle (4) if damage is found.
e. Inspect couplings (1 and 3) for cracks, burns or damaged surface.
f. Replace couplings (1 and 3) if damage is found.