3-8. NOZZLE STAND ASSY INSPECT/REPLACE
Remove stand assy from system by folding up.
Dry-cleaning solvent, P-D-680, used to clean parts is potentially dangerous to
personnel and property. Avoid inhalation of fumes and repeated or prolonged
skin exposure. Wash exposed skin thoroughly with soap and water. Use in well
ventilated area away from open flame or excessive heat. Flash point is 100°F
a. Wash all parts in cleaning solvent P-D-680 to remove all
dirt and foreign matter. Dry with clean lint free cloth.
b. Inspect nozzle stand assy in accordance with PMCS.