TM 5-4610-228-13
TM 08846A-13/1
4 - 1 0 . H O S E A S S Y S , R E P A I R ( C O N T ) .
LOCATION/ITEM
ACTION
REMARKS
f. Bend band back over buckle teeth and release tension
handle.
g. Cut band with tools cutting handle (1) while holding end
of band down with thumb (2).
h. Secure stub by tapping prongs of buckle down with a
hammer (3).
i.
Repeat steps a through h for each clamp installed.
j.
Install new gasket (5) in cap (6).
k. Install new gasket (8) in female coupling(9).
l. Remove protective caps and plugs from hose assy.
m. Reinstall in water distribution system in the reverse
order of removal.
n. Repair of the hose assy is limited to replacement of
defective parts.
4-10 Change 2