2-184.108.40.206 Two-Inch Hose Connection Kit
Item 31 consists of identical inter-connected hose assys. Simplify assembly by
connecting the hose before performing next step.
a. Connect hoses (31) to tee assy (32) of the output flow side 350 GPM pump connection kit. Position a hose.
b. Connect tee assy (32), reducer (33), valve assy (34) and discharge hose assy (35).
c. Unfold and setup stand assy (36).
d. Remove cap from discharge hose assy (35) and hang from hook located on the stand assy (36).
e. Remove cap from tee assy (32).
f. Repeat steps (a) through (h), above, for the remaining hose connection kits. There should be a total of 4
hose connection kits in the 300K WDS system. There should be a total of 6 hose connection kits in the 800K
and 1,000K WDS systems.